Digital electronics · Free course

FPGA Design and Implementation

A project-driven course in twelve weekly chapters: design digital hardware in VHDL and SystemVerilog, verify it, meet timing, then build DSP, communications, video, processor, AI and security blocks.

24 lessons20 h 35 min totalStarts at beginner levelFree, no sign-upUpdated 20 November 2026

FPGAs let you build custom digital hardware without fabricating a chip. You describe the circuit in a hardware description language, a tool maps it onto a grid of configurable logic, and seconds later the hardware is running on your desk. This course takes you through that whole process.

The course follows a twelve-week plan, one chapter per week. It starts with how an FPGA is built, because good HDL code follows from knowing what the tools can map it onto. Weeks 3 to 6 cover synthesizable VHDL and SystemVerilog, verification with self-checking testbenches and Python (cocotb), timing closure and safe clock domain crossing.

The second half applies those skills to the jobs FPGAs do in industry: fixed-point DSP and FIR filters, communications blocks such as DDS, CRC, a UART and digital modulation, streaming video and image processing, soft RISC-V processors and high-level synthesis, quantised neural-network inference, and hardware security. Every week adds a block to one growing system.

Who it is for

Electronics and computer engineering students, embedded software engineers moving into hardware, and working engineers who want a structured refresher.

Hardware

No board is required for most lessons; every example runs in a free simulator. For the hardware steps, any low-cost board works, for example a Digilent Basys 3 (AMD Artix-7), a Terasic DE10-Lite (Intel MAX 10) or an iCEBreaker (Lattice iCE40).

Software

Icarus Verilog or Verilator for simulation, plus your FPGA vendor's tool (most offer a free edition or free licence for smaller devices; check the vendor site for current terms) or the open-source Yosys and nextpnr flow.

Syllabus

10 modules · 24 lessons · 20 h 35 min

Frequently asked questions

Do I need an FPGA board to take this course?

No. Every lesson can be completed in a free simulator. A board is only needed if you want to run the UART project on real hardware, and any low-cost development board will do.

Should I learn Verilog or VHDL first?

Either works, and the concepts transfer directly. The course uses SystemVerilog for most examples because it is common in industry and in open-source tools, and shows VHDL equivalents for the core constructs.

What background do I need?

Basic digital logic (gates, binary numbers, flip-flops) and some experience with any programming language. Lesson 1 and the glossary cover the terms you need.

Is the course free?

Yes. All lessons, quizzes and code downloads are free to use.